100 mm x 180 mm x 34 mm ISO 6220-2RS deep groove ball bearings

High Quality 100 mm x 180 mm x 34 mm ISO 6220-2RS deep groove ball bearings. 514 mm Da max. Competitive 100x180x34 bearing Pricing. 100 mm x 180 mm x 34 mm Accept Small Order. Easy and Fast Shipping.

What is 6220-2RS bearing cross reference?

Brand Name:ISO
Model Number:6220-2RS
Bearing number:4T-32008X
Size (mm):40x68x19
Bore Diameter (mm):40
Outer Diameter (mm):68
Width (mm):19
d:40 mm
D:68 mm
T:19 mm
PDF 6220-2RS

Product Details

Bearing number4T-32008X
Size (mm)40x68x19
Bore Diameter (mm)40
Outer Diameter (mm)68
Width (mm)19
d40 mm
D68 mm
T19 mm
B19 mm
C14,5 mm
ra1 max.1 mm
a15 mm
r min.1 mm
r1 min.1 mm
da min.45,5 mm
Da min60 mm
Da max.62,5 mm
db max.46 mm
Db min.65 mm
ra max.1 mm
Sa4 mm
Sb4,5 mm
Weight0,273 Kg
Basic dynamic load rating (C)50 kN
Basic static load rating (C0)65,5 kN
(Grease) Lubrication Speed5 300 r/min
(Oil) Lubrication Speed7 100 r/min
Calculation factor (e)0,38
Calculation factor (Y0)0,87
d154.5 mm
rs min1 mm
r1s min1 mm
e0.38
Y21.58
Y00.87
Mass0.27 kg
ISO 355 referenceT3CD040
Dynamic load, C50 kN
Rating life coefficient, A21.4
Static load, C065.5 kN
Fatigue limit load, Cu8 kN
Nlim (oil)7,100 rpm
Nlim (grease)5,300 rpm
Min operating temperature, Tmin-40 °C
Max operating temperature, Tmax120 °C
Characteristic cage frequency, FTF0.44 Hz
Characteristic rolling element frequency, BSF7.77 Hz
Characteristic outer ring frequency, BPF09.21 Hz
Characteristic inner ring frequency, BPFI11.79 Hz
da max46 mm
db min45.5 mm
Da max62.5 mm
Db min65 mm
Ca min4 mm
Cb min4.5 mm
ra max1 mm
r1a max1 mm
CategoryRoller Bearings
Inventory6.0
Minimum Buy QuantityN/A
Product GroupB04334
View more

Company Profile

Phone +91-1294-268591
View more

Related News

  • Trailer Maintenance??? - Outdoor Gear Forum | In-DepthCan I pack it by hand or do I need a grease gun? IMO, there is no benefit to repacking bearings if by “repacking” you mean simply taking the If the bearing buddies are installed properly...
  • Ten Important Facts About Engine Bearing ClearanceJul 3, 2019 — The Rule of Thumb The factory specs include 2.450-inch main bearing journals and 2.100-inch rod journals, which means the target bearing clearance should be about 0.0024-inch (0.0025...
  • What's the normal operating temperature of bearingsDear All, I have very little knowledge on bearings and would like to may unavoidably result from bearings in hot environments or processes. But with luck there will be a symptom of a (too) rapid...
  • Recommended Products

    All Products Contact Now