100 mm x 250 mm x 58 mm ISO NH420 cylindrical roller bearings

Enjoy High 2500 RPM maximum rpm: Margins on Competitive 100x250x58 bearing Pricing.Great Wholesale 100 mm x 250 mm x 58 mm Products at Low Costs.

What is NH420 bearing interchange´╝č

Brand Name:ISO
Model Number:NH420
Series:95000
Cone Part Number:95475
Cup Part Number:95923V
Design Units:Imperial
Bearing Weight:12.4 Kg
Cage Type:Stamped Steel
d:120.650 mm
D:234.95 mm
PDF NH420

Product Details

Series95000
Cone Part Number95475
Cup Part Number95923V
Design UnitsImperial
Bearing Weight12.4 Kg
Cage TypeStamped Steel
d120.650 mm
D234.95 mm
B - Cone Width63.5 mm
C - Cup Width49.213 mm
B63.5 mm
R - Cone Backface To Clear Radius16.35 mm
r - Cup Backface To Clear Radius23.30 mm
da - Cone Frontface Backing Diameter136.91 mm
db - Cone Backface Backing Diameter149.10 mm
Da - Cup Frontface Backing Diameter217.90 mm
Db - Cup Backface Backing Diameter209.04 mm
Ab - Cage-Cone Frontface Clearance4.8 mm
Aa - Cage-Cone Backface Clearance5.6 mm
a - Effective Center Location3-14 mm
C90 - Dynamic Radial Rating (90 million revolutions)436700 lbf
C1 - Dynamic Radial Rating (1 million revolutions)5141000 lbf
C0 - Static Radial Rating209000 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)623200 lbf
K - Factor71.58
e - ISO Factor80.37
Y - ISO Factor91.62
G1 - Heat Generation Factor (Roller-Raceway)453.9
G2 - Heat Generation Factor (Rib-Roller End)59.4
Cg - Geometry Factor0.132
View more

Company Profile

Phone +91-1294-268591
View more

Related News

  • Trailer Maintenance??? - Outdoor Gear Forum | In-DepthCan I pack it by hand or do I need a grease gun? IMO, there is no benefit to repacking bearings if by “repacking” you mean simply taking the If the bearing buddies are installed properly...
  • Ten Important Facts About Engine Bearing ClearanceJul 3, 2019 — The Rule of Thumb The factory specs include 2.450-inch main bearing journals and 2.100-inch rod journals, which means the target bearing clearance should be about 0.0024-inch (0.0025...
  • What's the normal operating temperature of bearingsDear All, I have very little knowledge on bearings and would like to may unavoidably result from bearings in hot environments or processes. But with luck there will be a symptom of a (too) rapid...
  • Recommended Products

    All Products Contact Now