100 mm x 250 mm x 58 mm FAG NJ420-M1 + HJ420 cylindrical roller bearings

How Hinged Top frame type: do I place an EMERGENCY 100 mm x 250 mm x 58 mm order for a 100 mm x 250 mm x 58 mm FAG NJ420-M1 + HJ420 cylindrical roller bearings that I want to pick up at a our store?

What is NJ420-M1 + HJ420 bearing cross reference´╝č

Brand Name:FAG
Model Number:NJ420-M1 + HJ420
Series:07000
Cup Part Number:07196-B
Design Units:Imperial
D:1.9687 in
D1 - Flange Outer Diameter:2.1209 in
C - Cup Width:0.3750 in
C1 - Cup Flange Width:0.1094 in
r - Cup Backface To Clear Radius1:0.04 in
PDF NJ420-M1 + HJ420

Product Details

Series07000
Cup Part Number07196-B
Design UnitsImperial
D1.9687 in
D1 - Flange Outer Diameter2.1209 in
C - Cup Width0.3750 in
C1 - Cup Flange Width0.1094 in
r - Cup Backface To Clear Radius10.04 in
Da - Cup Frontface Backing Diameter1.95 in
K - Factor21.45
e - ISO Factor30.4
Y - ISO Factor41.49
G1 - Heat Generation Factor (Roller-Raceway)51.07
G2 - Heat Generation Factor (Rib-Roller End)1.07
Cg - Geometry Factor60.0509
View more

Company Profile

Phone +91-1294-268591
View more

Related News

  • Trailer Maintenance??? - Outdoor Gear Forum | In-DepthCan I pack it by hand or do I need a grease gun? IMO, there is no benefit to repacking bearings if by “repacking” you mean simply taking the If the bearing buddies are installed properly...
  • Ten Important Facts About Engine Bearing ClearanceJul 3, 2019 — The Rule of Thumb The factory specs include 2.450-inch main bearing journals and 2.100-inch rod journals, which means the target bearing clearance should be about 0.0024-inch (0.0025...
  • What's the normal operating temperature of bearingsDear All, I have very little knowledge on bearings and would like to may unavoidably result from bearings in hot environments or processes. But with luck there will be a symptom of a (too) rapid...
  • Recommended Products

    All Products Contact Now