100 mm x 180 mm x 34 mm ISO 7220 C angular contact ball bearings

100 mm x 180 mm x 34 mm ISO 7220 C angular contact ball bearings with easy-to-use parts graphics, giving you the 100 mm x 180 mm x 34 mm ability to check parts availability, 100x180x34 bearing pricing, examine remanufactured options.

What is 7220 C bearing cross reference´╝č

Brand Name:ISO
Model Number:7220 C
Series:86000
Cone Part Number:86669
Design Units:Imperial
Cage Type:Stamped Steel
C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:195000 lbf
C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:50500 lbf
d:6.6929 in
B - Cone Width:1.8125 in
PDF 7220 C

Product Details

Series86000
Cone Part Number86669
Design UnitsImperial
Cage TypeStamped Steel
C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1195000 lbf
C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)250500 lbf
d6.6929 in
B - Cone Width1.8125 in
R - Cone Backface To Clear Radius30.190 in
da - Cone Frontface Backing Diameter7.09 in
db - Cone Backface Backing Diameter7.44 in
Ab - Cage-Cone Frontface Clearance0.11 in
Aa - Cage-Cone Backface Clearance0.25 in
a - Effective Center Location4-0.06 in
C90 - Dynamic Radial Rating (90 million revolutions)529000 lbf
C1 - Dynamic Radial Rating (1 million revolutions)6112000 lbf
C0 - Static Radial Rating145000 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)718300 lbf
K - Factor81.58
G1 - Heat Generation Factor (Roller-Raceway)466.3
G2 - Heat Generation Factor (Rib-Roller End)111.9
Cg - Geometry Factor0.1040
View more

Company Profile

Phone +91-1294-268591
View more

Related News

  • Trailer Maintenance??? - Outdoor Gear Forum | In-DepthCan I pack it by hand or do I need a grease gun? IMO, there is no benefit to repacking bearings if by “repacking” you mean simply taking the If the bearing buddies are installed properly...
  • Ten Important Facts About Engine Bearing ClearanceJul 3, 2019 — The Rule of Thumb The factory specs include 2.450-inch main bearing journals and 2.100-inch rod journals, which means the target bearing clearance should be about 0.0024-inch (0.0025...
  • What's the normal operating temperature of bearingsDear All, I have very little knowledge on bearings and would like to may unavoidably result from bearings in hot environments or processes. But with luck there will be a symptom of a (too) rapid...
  • Recommended Products

    All Products Contact Now